The TROY U-shape console mount straddles any TROY standard-width (8 7/8") console with parallel walls.

A swing arm that is bolted to the U mount is designed to positive-lock every 30°. The swing arm supports a tilt and swivel docking station base to complete the assembly.

If you have any questions about pairing a U mount with a TROY console, call customer service for guidance.

Docking Station Model

Panasonic CF18/19
Panasonic CF27-29
Panasonic CF30
Gamber Johnson

Ledco/HavisKodiak/Jotto Desk

Docking Station Model

Panasonic CF18/19
Panasonic CF27-29
Panasonic CF30
Gamber Johnson
Ledco/Havis/Kodiak/Jotto Desk

Choose from the following part numbers to place an order.

U-Shape Console Mount

U-Mount Swing-Arm Assembly (9" Reach)

CM-UMNT-SA-CF19
CM-UMNT-SA-CF
CM-UMNT-SA-CF30
CM-UMNT-SA-GJ30 (For Gamber dock with 2" x 4" threaded mtg. holes)

CM-UMNT-SA-LED

U-Mount Sliding Swing-Arm Assembly (Max. 17" Reach)

CM-UMNT-SL-CF19
CM-UMNT-SL-CF
CM-UMNT-SL-CF30
CM-UMNT-SL-GJ30 (For Gamber dock with 2" x 4" threaded mtg. holes) CM-UMNT-SL-LED

• U bracket made from 11 ga. steel and height adjustable
• Bracket straddles most Troy consoles (console model must have parallel walls)
• Can be used with swing arm or sliding swing arm
• Gusseted & welded design assures strength & stability
• U bracket can be turned around to position computer toward passenger

This docking station mount is designed to work specifically with any TROY MC or MODCON console. (A similar mount is available for a CC-C06 console and for a CC-C07 console.) Bolted to an MC/Modcon specific platform is a swing arm designed to positive-lock every 30°. A tilt-and-swivel docking station base is mounted to the swing arm to complete the three-part assembly.

.

• Bolts to dashboard end of any MC or Modcon console
• Mounting platform fitted with notched disk and stud
• Allows for 180 degree rotation
• Requires moving console away from dashboard for docking station swivel room
• Easy to reach/good view for user

Choose from the following part numbers to place an order.

Docking Station Model

Panasonic CF18/19
Panasonic CF27-29
Panasonic CF30
Gamber Johnson
Ledco/Havis/Kodiak/Jotto Desk

Docking Station Model

Panasonic CF18/19
Panasonic CF27-29
Panasonic CF30
Gamber Johnson
Ledco/Havis/Kodiak/Jotto Desk

MC-Modcon Swing-Arm Assembly (9" Reach)

CM-MCMT-SA-CF19
CM-MCMT-SA-CF
CM-MCMT-SA-CF30
CM-MCMT-SA-GJ30 (For Gamber dock with 2" x 4" threaded mtg. holes)
CM-MCMT-SA-LED

MC-Modcon Sliding Swing-Arm Assembly (Max. 17" Reach)

CM-MCMT-SL-CF19
CM-MCMT-SL-CF
CM-MCMT-SL-CF30
CM-MCMT-SL-GJ30 (For Gamber dock with 2" x 4" threaded mtg. holes)
CM-MCMT-SL-LED

• Can afford to give up 7" of face plate mounting area required for this mount to be installed
• Want to install the computer mount out of the airbag zone
• Have either a one-or two-man vehicle
• Are installing the console and swing-arm mount into a sedan
• Want to optimize passenger room/overall installation

 

Docking Station model

Panasonic CF18/19
Panasonic CF27-29
Panasonic CF30
Gamber Johnson
Ledco/Havis/Kodiak/Jotto Desk

 

MC Standard Swing-Arm Assembly (9" Reach)

CM-MC7-SA-CF19
CM-MC7-SA-CF
CM-MC7-SA-CF30
CM-MC7-SA-GJ30 (For Gamber dock with 2" x 4" threaded mtg. holes)
CM-MC7-SA-LED

 

• Can afford to give up 7" of face plate mounting area required for this mount to be installed
• Want the computer mount out of the airbag zone
• Have either a one- or two-man vehicle
• Are installing the console and swing-arm mount into a sedan
• Want to optimize passenger room/overall installation

For installations where additional reach is required (large SUV/trucks), you can substitute the swing arm for a sliding swing arm and get eight (8) additional inches of reach.

Click here to see the slide-arm version of this mount and part numbers.

For installations where you want to keep overall height to a minimum, you can substitute the console-insert computer mount for a low-profile model. You reduce the height by 1.25".

Click here to see the low-profile computer mount and part numbers.

Docking Station Model

Panasonic CF18/19
Panasonic CF27-29
Panasonic CF30
Gamber Johnson
Ledco/Havis/Kodiak/Jotto Desk

 

TMC Swing-Arm Assembly (9" Reach Only)

CM-TMC7-SA-CF19
CM-TMC7-SA-CF
CM-TMC7-SA-CF30
CM-TMC7-SA-GJ30 (For Gamber dock with 2" x 4" threaded mtg. holes)
CM-TMC7-SA-LED

 

Choose from the following part numbers to place an order.

Choose from the following part numbers to place an order.

MC AND MODCON CONSOLES ONLY

TMC (TAHOE) CONSOLE ONLY

Use the MC console-insert computer mount when you:

SPECIAL OPTIONS FOR MC CONSOLE-INSERT:

For installations where additional reach is required (large SUV/trucks), you can substitute the swing arm for a sliding arm and get eight (8) additional inches of reach.

Click here to see the slide-arm version of this mount and part numbers.

For installations where you want to keep overall height to a minimum, you can substitute the console-insert computer mount for a low-profile model. You reduce the height by 1.25".

Click to see the low-profile computer mount and part numbers.

SPECIAL OPTIONS FOR TMC CONSOLE-INSERT:

Use the TMC console-insert computer mount when you: