Adjustable - Consoles

Small Footprint Adjustable Consoles

The CC-C10 (10-inch console) and CC-C12 (12-inch console) have small enough footprints to be used as bench-seat consoles in most applications, especially in trucks.

Unlike the rest of the Troy Products console line, faceplates for the adjustable two-piece console get mounted to the console top rather than to aluminum faceplate rails set inside the console. The result is that faceplates sit on top of the console rather than flush with the console edges.

Troy Products also offers two adjustable consoles that utilize aluminum rails for flush setting of faceplates:

CC-C14-U – 14” console

CC-C18 – 18” console

Troy Products offers adjustable consoles for applications where flexibility is required. The adjustable consoles are a two-piece design: top and bottom. The bottom piece bolts directly to the floor plate. Because of its open (two-walled) design, it’s easier to complete required wiring. The top piece bolts to the bottom piece.

Seven (7) bolt holes oriented vertically and spaced .5” apart, (center to center) are pre-drilled onto both front and rear side walls of the bottom piece so you can set the top piece in a variety of positions.

At the lowest, level position, the console height is 6.5”.

At the highest, level position, the console height is 9.5”.

At the highest pitched position, the console height (at front) is 10”, 8.5” (mid-way), and 7” tall (at the low end).

The adjustability of this console is a great feature when working with long, single-piece equipment.

For applications where additional height is required (trucks, vans, e.g.), the two-piece adjustable consoles are also available in “tall” models where the maximum height is 16.125”.

Extra Tall Adjustable Consoles

For use in large-size trucks and vans, Troy Products offers a line of tall adjustable two-piece consoles. These tall consoles can be adjusted to a maximum height of 16 1/8”.

CC-C12H

CC-C14H

CC-C16H

CC-C18H

Note: Like the standard adjustable two-piece, only the 14” and 18” tall adjustable consoles feature aluminum faceplate rails. All other models have faceplates bolting directly to the top of the console. If you prefer aluminum rails, a custom two-piece can be made at a special price.