Consider our low-profile consoles for mounting remote head equipment. Nice low platform as base to add mounts for laptop or docking stations. Keeps dashboard area clear and optimizes access to equipment while at work in your vehicle.
Questions
about Troy? Call 1-800-700-8769 or (323) 720-4100
or Email us at productinfo@troyproducts.com
Copyright
Troy Products All Rights Reserved
LOW-PROFILE (REMOTE HEAD ) CONSOLES
Features:
- Holds 14" of face plates total
● Sloped area holds 6"
● Level area holds 8"
- Level area deep enough for internal beverage holder
- Dashboard end is 9.05" tall and level end is 5.25" tall
8.86"
W x 9.05" H x 21.74" L
14"
CC-LP-14
Features:
- Holds 14" of face plates total
● Sloped area holds 6"
● Level area holds 8"
- For 2008-2010 Chargers only
- Remove police-package floor plate and bolt directly to vehicle
- Rear of console pre-punched to fit low-profile armrest AC-ARMMNT-FX
- Flat surface area measures 8.86" x 8.70" can be used to mount computers
8.86"
W x 8.25" H x 29.14" L
14"
CC-CHB-14
Features:
- Holds 14" of face plates total
● Sloped area holds 3"
● Level area holds 11"
- Dashboard end is 6.38" tall and level end is 4.12" tall
- Equipment placed in 3" sloped area can go approx. 13"deep
- Flat surface measures 10" x 8.86" and is fitted with studs to mount computers (1.5" spacing for PCFX12 & 2" spacing for PCFX14-2)
- 4 pre-punched holes will accommodate arm rest, AC-ARMMNT-FX
- One (1) DC outlet hole pre-punched on each side
- Fits in any bucket-seat vehicle
8.86" W x 6.38" H x 25.13" L
14"
CC-PCFX14
Features:
- Holds 14" of face plates total
● Sloped area holds 3"
● Level area holds 11"
- For 2008-2010 Chargers only
- Remove police-package floor plate and bolt directly to vehicle
- Rear of console pre-punched to fit low-profile armrest AC-ARMMNT-FX
- Flat surface area measures 8.86" x 11.125" can be used to mount computers
8.86" W x 4.33" H x 29.81" L
14"
CC-CH09-14
Features:
- Holds 15" of face plates total
● Sloped area holds 9"
● Level area holds 6"
- Deepest portion of sloped faceplate mounting area is 6.375"
- Depth at end of sloped area is 4.625"
- One (1) DC outlet hole is pre-punched on each side
- Fits in any bucket-seat vehicle
- Three studs spaced 1.5" center to center to accommodate sliding docking station mount, CM-SDSMNT
CC-BPD-15
8.86" W x 6.375" H x 24.0" L
15"
Features:
- Holds 16" of face plates total
● Sloped area holds 8"
● Level area holds 8"
- Height is 2.75” shorter than the CC-MC-16 standard
- Dashboard end of console 9.054" at level end 5.25"
- One (1) DC outlet hole is pre-punched on each side
- 4 pre-punched holes at console end designed to accommodate arm rest model AC-ARMMNT-FX
- Consoles designed to accommodate computer mount platform, CM-MODCONMNT
- CM-MODCONMNT used for laptop or docking station swivel mounts
Click image to enlarge
8.875" W x 9.0" H x 21.74" L
16"
CC-MC16-S
.JPG)
