Troy Products plate designed to fit the Ford Crown Victoria taillight to deter break-in to trunk.

 

2000 - 2010          AC-CVLA-PLT - Covers 100% of the affected area and is easy to install. A drilling guide is also available, part number AC-GUIDE-CV (The drilling guide is included at no charge for orders of 20 sets or more).

1999 – 2009              AC-CV08-WPS - Window screen for passenger-side rear window

                                    AC-CV08-WDS - Window screen for driver-side rear window

CONSOLES

Troy Products categories contained on this page can be scrolled to or quick-linked.

Consoles

For 2003 and newer Crown Victorias, use the Troy Products “US”partition line

 

 

 

 

 

 

 

 

 

 

 

 

 

We also have “notched” partitions for Crown Victorias equipped with Ford’s “Crown” package with wire harness in an enclosure located on the transmission hump. Troy cages are notched to fit over the harness enclosure. Additionally, kick panels are also notched. These “notched” parts are distinguished with part numbers containing “AZ.”

 

Following are the mounting kits and kick panels for your model year:

 

TP-US Partition Mounting Kits

Note: Big Boy mounting kits allow more room for the driver.

 

2005 – 2008     2-PAR-28-CV05S – Standard mounting kit

2005 – 2008     2-PAR-28-CV05 – Big Boy mounting kit

 

TP-US Partition Kick Panels

 

2003 – 2008     2-PAR-25-CV04-F – Flat kick panel

2003 – 2008     2-PAR-25-CVSS – Stash-n-Stow 3-pc. kick panel assembly

2003 – 2008     2-PAR-25-CVS3AZ – “Notched” Stash-n-Stow 3-pc. kick panel

                                                                   assembly

An alternative is Troy Products “COMPACT” line of partitions.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note: TP-COMPACT partitions come only in a fully diamond-punched window. Lexan “spit shields” are sold separately.

NEW SIDE AIRBAG STYLE
Click here to see NEW SIDE AIRBAG CAGE installed

2010     2-MNT-PCV09

 

TP-COMPACT Partition Mounting Kits

Note: No Big Boy mounting kits available for the TP-COMPACT line

 

2004 – 2008     2-PAR-28-PCV03

2005 – 2007     2-PAR-28-10300

 

TP-COMPACT Partition Kick Panels

 

2004 – 2008     2-PAR-25-PCV04-F – Flat kick panel

2004 – 2008     2-PAR-25-PCV-SS – Stash-n-Stow 3-pc. kick panel assembly

 

TP-COMPACT Spit Shields

Note: Bolt directly to partition

 

2003 – 2008     AC-PLEXGARD-60 – 60% window area coverage

                           AC-PLEXGARD-100 – 100% window area coverage; includes

                                                                      ventilation holes 

Troy Products has an extensive line of computer mounting solutions for Crown Victorias.  Please go to COMPUTER MOUNTS to see our full line.

All Crown Vic consoles are designed to accommodate two-piece computers, universal laptop trays, and docking stations. Please contact Customer Service for guidance.

 

The mounting solutions that follow are only those that are specific to a Crown Victoria. 

The CM-H2025 is a passenger seat mounting bracket with twin arm articulation.

 

CM-H2025, passenger-seat mounting bracket with twin-arm vertical post that articulates up and down, swings toward driver and passenger, swivels left to right, and pivots forward and back. 

 

For laptops use:

CM-HLT103 locking laptop tray that unlocks/opens from the side, with finger clamps on the side.

CM-HLT109 locking laptop tray that opens from front to back. Leaves ports accessible, with finger clamps that grab from front to back.

DOOR SKIN INSTALLED

Troy Products offers both half-size and full-size equipment trunk trays for the

Crown Victoria.

 

2000 – 2008         AC-CVTRAY50 - Half-size equipment trunk tray

                               AC-CVTT50-05 - Mounting brackets for half-size trunk tray

2000 – 2009     AC-CVTRAY - Full size equipment trunk tray

                          

                           AC-RSOCVT-FS – Full size equipment trunk tray, with:

                           Diamond punched fence

                           Plywood sheet for mounting equipment

                          

                           AC-CVTT2000 – Mounting brackets – child seat U brackets removed

2003 – 2009     AC-CVTT2003 – Mounting brackets – child seat U brackets left in

 

Note: The mounting bracket issues are due to back seat changes. Child seat brackets were instituted in the 2003 model year. 

 

When replacing factory back seat with a plastic one, remove child seat brackets and use mounting bracket AC-CVTT2000 to install full-size tray.

 

When leaving child seat brackets in place, use mounting bracket AC-CVTT2003.

Troy Products offers a trunk organizer that is designed specifically to fit the Crown Victoria trunk well.  We have several customized designs to suit a variety of customer preferences.  In addition to the Crown Victoria specific trunk organizer, we also sell a universal trunk organizer that can be used in this vehicle.

 

2000 – 2009      AC-CVLTBOX – w/locking gun compartment

 

2000 – 2009       AC-CVTO-LID – Hinged lid for the AC-CVLTBOX covers open area behind gun compartment to create flat surface on which to stack additional equipment.  Easily removable.

AC-CVLTBOX

Specifically for the Crown Victoria trunk

 

2000 – 2009       AC-CVTLGBX - w/cipher lock

 

Bolts to rear trunk wall. 

Cipher lock provides additional security. 

AC-CVLTGBX Installed

---